How To Install Bi Xenon Hid Kit
Bi-Xenon HID Conversion Kit Installation Guide
Other Guides:
- Standard Kit (Single Beam)
- Single beam (With Relay)
- Hi/Lo (Xenon Lo-beam/Halogen Hi-beam)
Notation: Never touch the bulb with your hands and go on them equally clean as possible. Also, information technology is strongly recommended y'all use dielectric grease in all of the connections – it will help secure a better electrical connection.
- Disconnect the negative terminal of your motorcar battery.
- Disconnect your stock bulbs and remove them from the light housing.
- Install the HID seedling into the light housing and connect the HID seedling to the wire coming out of the ballast
- Mount the ballast to the engine compartment with the brackets provided, where is not equally important as long as information technology is secure. Yous should also have the bracket mounted vertically and so the anchor does not have the potential to fall out with a hard bump or excessive vibration. Some people will use zip ties to further secure the ballast horizontally, although this is not necessary in nearly cases.
- Remove the fuse from the relay harness.
- Connect the negative (black) wire to a grounded connection on your vehicle (this assumes your vehicle is grounded negative). If possible, do not connect this wire directly to your bombardment.
- Connect the red wire to the positive (carmine) terminal of your bombardment.
- Connect the adapter from the closest headlight wire of your machine'southward system into the input on the harness. The other side will remain unplugged just should be capped with electric tape to keep from being exposed.
- Connect the Hi-Beam switching cable between the harness and the calorie-free bulb.
- Connect the anchor leads to the two ballasts.
- Secure any loose wiring with zippo ties or insulation.
- Replace the fuse on the relay harness.
- Connect the battery and test the lights to make certain they work correctly.
Later Installation: One time everything checks out, you lot will want to aim your headlamps slightly down. The increased light output coming from a reflector housing could interfere with oncoming traffic. If you lot experience any flickering, double check your connections and contact Customer Support. If y'all have whatsoever other bug, contact us for troubleshooting.
Guide Type:
Guide Images:
Source: https://www.onyxlights.com/installation-guides/bi-xenon-hid-conversion-kit-installation-guide
Posted by: byerswitterlass.blogspot.com
0 Response to "How To Install Bi Xenon Hid Kit"
Post a Comment